designed and manufactured in germany designed and manufactured in germany AXE25 rev.1 www.axtal.com roemerring 9 drawing d0 fon: +49 (6261) 939834 d-74821 mosbach page 1(3) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg specification AXE25 rev.: 1 date: 2014-04-04 oscillator type: crystal oscillator (spxo) in doubl e-sealed dil14 package parameter min. typ. max. unit condition frequency range 1 150 mhz frequency stability overall stability (note 2) 10 to 100 see table 1 ppm option 2 vs. operating temperature range see table 2 option 3 long term (aging) per year 2 ppm @ 40c rf output signal waveform sine wave load 50 ? 10% output level +3 dbm harmonics -30 dbc start-up time 10 ms supply voltage v s 3.15 4.75 3.3 5.0 3.45 5.25 v v option 1 = 33 option 1 = 50 current consumption (steady state) (note 3) 45 25 ma ma option 1 = 33 option 1 = 50 enclosure (see drawing) (lxwxh) 20.7x13.1x7.5 max. mm iec 60679-3 co 02 weight 5 g packing palette or tube iec 60286-3 notes: 1. terminology and test conditions are according to ie c60679-1 and mil-prf-55310, unless otherwise stated 2. other stabilities on request 3. depending on frequency and supply voltage 4. all combinations of options might not be available. please consult factory absolute maximum ratings parameter min. max. unit condition supply voltage v s -0.5 v s + 10% v v s to gnd storage temperature -55 +125 c overall stability and temperature range stability lower temperature upper temperature option 2 [ppm] option 3 t [c] option 3 t [c] 10 10 0 0 a +50 15 15 1 -10 b +60 25 25 2 -20 c +70 50 50 3 -30 d +75 100 100 4 -40 e +80 5 -55 f +85 g +105 h +125 table 1 table 2
designed and manufactured in germany designed and manufactured in germany AXE25 rev.1 www.axtal.com roemerring 9 drawing d0 fon: +49 (6261) 939834 d-74821 mosbach page 2(3) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg ordering code model option 1 [supply voltage] option 2 [stability] option 3 [temperature range] revision frequency [mhz] AXE25 33 or 50 table 1 table 2 rev.1 10.000 example: AXE25-50-25-2c_rev.1 C 10.000 mhz enclosure drawing pin connections pin # symbol function 1 n.c. no connection 7 gnd ground 8 rf out rf output 14 vs supply voltage handling and testing parameter procedure source handling and testing application note axan-011 www. axtal.com processing application note axan-012 www.axtal.com parameter procedure condition electrostatic discharge (esd) thd devices iec60749-26 hbm 2000 v smd devices iec60749-27 mm 200 v washable yes no rohs compliant yes no
designed and manufactured in germany designed and manufactured in germany AXE25 rev.1 www.axtal.com roemerring 9 drawing d0 fon: +49 (6261) 939834 d-74821 mosbach page 3(3) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg environmental conditions test iec 60068 part iec 60679-1 clause mil-std- 202g method mil-std- 810f method mil-prf- 55310d clause test conditions (iec) sealing tests (if applicable) 2-17 5.6.2 112e 3.6.1.2 gross leak: test qc, fine leak: test qk solderability resistance to soldering heat 2-20 2-58 5.6.3 208h 210f 3.6.52 3.6.48 test ta method 1 test td 1 method 2 test td 2 method 2 shock* 2-27 5.6.8 213b 516.4 3.6.40 test ea, 3 x pe r axes 100g, 6 ms half-sine pulse vibration, sinusoidal* 2-6 5.6.7.1 201a 204d 516.4-4 3.6.38.1 3.6.38.2 test fc, 30 min per axes, 10 hz - 55 hz 0,75mm; 55 hz - 2 khz, 10g vibration, random* 2-64 5.6.7.3 214a 514.5 3.6.38.3 3.6.38.4 test fdb endurance tests - ageing - extended aging 5.7.1 5.7.2 108a 4.8.35 30 days @ 85c, ocxo @25c 1000h, 2000h, 8000h @85c other environmental conditions on request data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice. revision history rev. drawing date [dd.mm.yyyy] remarks author checked 1 d0 04.04.2014 first issue hh hh
|
